Fix: Orbi flashing white light with simple steps

The issues related to the Orbi flashing white light or slow Wi-Fi signals will abstain us from the Netgear orbi login process. Orbi flashing white light problem is very common with most Netgear Orbi users. Netgear is making such great networking products that do not match other brands. The Wi-Fi routers and Mesh WIFI system is beating other similar products in the market. In the upcoming article, we will disclose the astute guidelines. It will help to fix encountered Orbi flashing purple light issues during the access process.

Reasons behind Orbi flashing white light issue

The cause behind Orbi flashing white light issue is a firmware update. You may get this problem after an inaccurate firmware update. Secondly, you may face the issue after resetting. When you reset your Orbilogin WIFI system, it may not have rebooted. In this case, you need to reset and reboot your Orbi router once again. Moreover, let us do some troubleshooting steps;

Orbi flashing White light issue causes 

Are you trying to access your Orbilogin page but failing due to Orbi flashing white light issue? Then try these steps as mentioned below.  

• First, make sure that your Orbi router and satellites have been plugged in with an active power source.       
• If your Orbi devices are on, the power LED lights should be solid green.
• Make sure the device that you are using to configure orbilogin.com the page has an active internet connection.      
• Check the connectivity by clicking on the internet icon from the bottom right corner of this page. 
• If you are facing trouble using the orbilogin.com web portal, then try using a direct Ethernet cable connection.     
• Take the Ethernet cable and connect it to one of the available Ethernet ports on your router.    
• If still failed to resolve the Orbi flashing white light, try power cycling your Orbi devices. 
• Power off the router, modem and computer and leave them in off mode for five minutes.  

Possible solutions to fix Orbi flashing white light issue

1. Reset your Orbi router

The reset process will make your router and satellite un-sync from one another. You have to pair the devices again when the reset completes. The reset process will also erase all personalized data, such as the SSID, Password, IP address, etc.  

1. Make sure you have a backup before you initialise the backup process.
2. Press and hold the reset button until the power LED on your Orbi device blinks amber. 
3. Repeat this action on all of your Orbi devices, and wait for them to reboot.       
4. That’s it! Now you will not face an orbi login failed issue in any way. 
5. You can configure your router again using the default user login credentials.

2. Resolve Orbi flashing white via Firmware update

1. To update the firmware of your router, first, log in to your router’s web interface face.      
2. Go through the orbilogin.com page only.  Turn on the router and unlock a web browser.       
3. Make sure to connect the router with the modem and the computer via an Ethernet cable.      
4. You can access the orbilogin.com page through a computer device. It must have an active internet connection. 
5. On the address page of the web browser, enter 192.168.0.1 or www.orbilogin.com.       
6. Then the login page will appear on the screen.        
7. On the orbi login page, enter the user name and password of your router. Now you are on the web interface of your router.        
8. Go to the support site of your router, and search for the most recent firmware version.         
9. Type the model number of your device and download the firmware file.       
10. Save the file on your computer. First, unzip the file from any tool you have.           
11. After unzipping the firmware file, please save it to a local destination. Go to the Basic homepage of your router and access Settings.       
12. Then go to Administration and then get the Firmware Update. 

Click Browse or bring the extracted file here and upload. Let the firmware upload process run without any interruption. When the firmware update process completes, the router will restart.

 3. Synchronize the router with the Orbi satellite  

Plug the Orbi satellite into the wall outlet of your home. Place the satellite near the router to get it synchronized. Turn the power of your Orbi satellite. Check the LED status. If the ring LED light of the satellite will flash white, press the sync button.  

• Firstly, press the sync button on the router and then on the satellite within two minutes.
• When the ring LED light of the Orbi Blue Light blinks, the connection between the router and the satellite is good.
• When the satellite’s ring LED is amber, the connection is fair but requires the satellite to bring a little closer to the router. 
• When the ring LED light of the satellite is magenta, the sync process is not successful and needs to sync again. 

4. At last, Power cycle the devices 

To turn on the devices connected using an Ethernet cable. After that, first of all, press the power button available at the back of the router. After pressing the power switch on the power outlet. The Orbi router LED will turn solid white, indicating that the router is up to use. Then, power on the modem connecting back its power line adapters. Also, insert the backup batteries if required, or if the modem has. Now turn on the computer and connect it to the available internet connection of your house to perform further configuration.

It is all about the Orbi flashing white light issue. Hoe, you have successfully fixed the issue. If you still have any problem contact us any time. Our Orbilogin experts are ready to resolve your queries.