In a pier and beam construction, you will want to consider the cost of maintenance and safety features when constructing the pier. Without these features, you could face problems down the line. In addition to the initial costs, there are also ongoing costs associated with maintenance. In this article, we’ll discuss the costs associated with a typical helical pier installation and where you should place a helical pier in new construction.

Little Island Is A New Construction Pier

The Little Island is a groundbreaking new construction pier that blends the most recent advances in digital design and fabrication technology. It is a functional structure with a playful, sculptural aesthetic. The team utilized parametric scripts, automation, and digital data communication to overcome the challenges of complex geometry. The project’s fabrication phase included milled foam formwork and bending rebar using a 3D model. It required a highly collaborative approach with stakeholders and contractors.

Little Island is situated on the Hudson River and sits atop a former industrial pier. In the 1800s, a bulkhead surrounded the island and protected it from storms. In 2013, the park trust and Barry Diller began work on a replacement for Pier 54. The design, by Thomas Heatherwick, featured a new structure that would link Manhattan with the island. The pier’s name changed in November to reflect its new design, which negates the area’s industrial past.

Typical Helical Pier Installation

Helical piers are a low-cost and eco-friendly way to stabilize a home’s foundation. They can be installed during any season of the year. They can even be used in areas with liquefaction or dense soil, which can make the installation process more expensive. In most cases, the cost of installing a helical pier is less than that of a conventional concrete pier.

Typically, a helical pier is installed during the pre-construction stage of new construction. Once installed, a contractor will drill a hole into the soil, insert the helical, screw it into place, and backfill it with soil. After the pier is placed, the contractor will then install a beam or other structure on top. In addition, the soil surrounding the piers is compacted to provide stability to the structure.

Cost Of Helical Piers

The cost of helical piers for new home construction varies from low to high depending on a number of factors. These factors include the type of soil, elevation, and distance from the water table. Aside from these factors, building codes also determine the required size of the helical pier. The price is typically lower in the Plains and Midwest, while it is higher in the Mid-Atlantic and Northwestern states. Moreover, the depth at which the foundation will be installed is another factor that can affect the price. This is because deeper foundations are necessary for projects that require more support.

The cost of helical piers for new home construction is generally lower than for other types of foundations. This is due in part to the fact that helical piers require less space than traditional piers. Additionally, they do not require extensive excavations, which reduces noise on site. This means that you can use smaller teams and more affordable equipment to install helical piers.

Placement Of Helical Piers In New Construction

Helical piers are often recommended by civil, geotechnical, and structural professionals for deep foundation anchoring. They are installed in the ground beneath foundation walls at key structural points, such as corners and load-bearing walls. They can also be used to anchor exterior walls. Helical piers are made of heavy-duty steel sections, which are drilled into the ground, bedrock, and soil strata to hold up the foundation. Then, footings are poured around them for maximum support.

Helical piers can address a variety of foundation problems, including settling or weak soil under the foundation. They also transfer the weight from the building to the load-bearing strata beneath the foundation, thereby stabilizing the structure and limiting damage caused by shifting. Whether or not helical piers are appropriate for your specific situation depends on your site’s soil type and other structural factors.

Cost Of Post-Construction Piers

Post-construction piers can add to the overall construction cost of a new construction project. The labor cost can range from around $240 to $4,000 per fully installed pier. The labor cost will vary according to the type of pier and the area it needs to be installed in. Some pier types require access challenges and can take more time to install than others.

When installing a pier, make sure that it is sized properly. The size of the pier is crucial to the overall stability of a structure. The piers may rest on crushed stone or reinforced concrete pads. They are typically placed 5 to 10 feet apart around the perimeter of the structure. Their diameters vary from 6 inches to 16 inches, depending on the weight of the structure they support.


Please enter your comment!
Please enter your name here