Breast milk is one of the best sources of nutrition for a baby, but it can be hard to produce enough on your own. If you’re breastfeeding and need to supplement with formula, you’ll likely want to use a breast pump to do so. Here are instructions for the medela breast pump cleaning correctly!
How to Clean the Medela Breast Pump
One of the best ways to keep your Medela breast pump clean and in good working condition is to clean it regularly. Follow these cleaning tips to keep your pump running smoothly:
– Clean the breast pump parts after each use by washing them in warm soapy water. If there are any cracks or openings on the parts, fill them with a drop of silicone sealant before washing.
– After cleaning, dry all components thoroughly with a cloth.
– Store the breast pump in a cool, dry place when not in use.
How to Unplug the Medela Breast Pump
If your breast pump becomes clogged, you’ll need to unplug it in order to clear the obstruction. Here’s how:
1. Make sure that the pump is properly plugged into an electrical outlet and the wall.
2. Lift up on the handle of the pump and twist it counterclockwise until it unscrews from the breast shield.
3. Gently pull out the breast shield and disc.
4. Remove the pump motor by gently tugging on one end and then lifting it out of its housing.
5. If there is any milk residue inside the pump motor, use a cotton swab or brush to clean it out. Be sure to dry it off before re-installing it into the housing.
How to Empty the Breastmilk Container
When it comes to cleaning the Medela Breast Pump, there are a few different steps that need to be taken. First, make sure that the pump is completely empty before cleaning. Second, place the pump on its side and remove the milk container using the release button. Next, wash the parts of the pump that come in contact with milk using warm soapy water and a soft cloth. Finally, dry the pump thoroughly before storing it.
How to Clean the Tubing
If you are like most breastfeeding mothers, you will likely clean your breast pump tubing at least once a day. There are a few different ways to do this, and it depends on the type of tubing your pump uses. Here are the steps for cleaning breast pump tubing using either a water or soap solution:
1. Fill a small bowl with warm water and add a small amount of soap.
2. Make sure the tubing is completely submerged in the water and allow it to soak for several minutes.
3. Carefully remove the tubing from the water and place it on a clean surface.
4. Use a mild soap solution to clean each end of the tubing. Be sure to rinse off the soap thoroughly before replacing the tubing into the pump chamber.
How to Clean the Pump Parts
If your breast pump is in good condition, you can clean it with a damp cloth and soap. If it’s not in good condition, you’ll need to take it to a repair shop or have it cleaned by a professional.
Conclusion
One of the most important aspects of taking care of your breast pump is keeping it clean. Here are a few tips on how to clean the Medela Breast Pump:
1. Pour boiling water into the pump’s bottle and let it cool for a few minutes before using. This will sterilize the pump.
2. Soak the tubing in warm, soapy water and scrub with a toothbrush or an old-fashioned soft cloth until all traces of milk are gone. Rinse well and let air dry.
3. Use sterilizing wipes to clean all parts of the pump, including its valves, tubing, connectors, and breast shields (if applicable). Make sure to avoid touching any electrical parts – these should always be cleaned by an expert!
