How To Do A Garage Door Roller ReplacementBefore replacing your rollers, you should first understand what kind of garage door you have. This article will provide you with information on the types of rollers, maintenance, and cost. It will also cover safety precautions. Before getting started, make sure you read the entire article first. Once you have read it, you should be able to replace rollers safely. Then, you can use the tips below to help you out.

Safety precautions

If you’re attempting to replace the rollers on your garage door, it’s imperative to follow certain safety precautions. First of all, always turn off the power to the door. Whether it’s an automatic opener or manual, working with an open garage door can lead to injury. Once you’ve shut off the power, you can easily access the lower rollers. You can lubricate them if necessary. Next, determine the roller’s condition. If the rollers are cracked, loose, or bent, it’s time to replace them.

To do this job, remove the old weather strip from the bottom of the garage door. This will help prevent dirt from getting inside. Likewise, check the cables. They are attached to the bottom roller with red screws. The cables may be loose, causing the garage door to jam and fall. It’s best to contact a professional to repair this problem. Lastly, be sure to secure the brackets.

Types of rollers

Among the different types of rollers for garage doors are nylon and steel rollers. Nylon rollers are much quieter and offer smoother movement. Steel rollers require more maintenance and lubrication. Nylon rollers are quieter, require minimal lubrication, and are energy-efficient. You can choose a combination of the two if you want your garage door to operate as smoothly as possible.

Steel rollers are also prone to rust and require regular lubrication. Steel rollers also make a noisy noise when in use. To extend their life, contact a professional garage door repair service. They can also provide regular maintenance visits. Then again, you can save money on the maintenance visit by avoiding expensive replacements. When in doubt, lubrication is the best solution. The pros at Creative Door Services can recommend a proper roller maintenance schedule.

The shaft length of rollers varies with the type of garage door. One of the most common sizes is two inches. The actual diameter is actually 1 3/4 inches. This difference ensures a secure fit and ample movement. Consequently, the diameter of rollers is a significant factor in determining the strength of garage doors. A two-inch diameter roller would only fit one hinge. A seven-inch-long stem would not be enough to fit two side-by-side hinges.

Maintenance

There are several ways to extend the life of your rollers. You should spray lubricant on the rollers every 6 months to prevent wear and tear. Regular maintenance will keep your rollers in good condition and will ensure that your door runs smoothly. Roller replacement is also necessary if the rollers start to exhibit wear and tear. A quality roller should last anywhere between 12 to 15 years. However, if you notice the following signs, it may be time to replace your rollers.

LEAVE A REPLY

Please enter your comment!
Please enter your name here