Are you looking for a router because you want to produce recessed hinges, rounded edges or invisible galvanizing, for example? In various router tests, we have researched which criteria are particularly important for this device.
In our comparison table, best ryobi sander pay attention to the specific parameters that are important for your milling work. Once you have found your favorite, you can easily order it directly to your home.
Buying advice: How to find the right product in our router comparison 2022
The most important in a nutshell
- For safe and clean work, tarnish protection for the router is recommended. This allows a smooth start, which allows a cleaner guide of the milling machine over the workpiece.
- In addition, a router should have two collets. One collet each for 6 and 8 mm attachments. For professional devices, there are other collet sizes.
- As an accessory for a router, there is a wide range of milling attachments that allow you to make a variety of different grooves and edge shapes. It is worthwhile to research the attachments for the router and their possibilities.
A router and a drill are very similar. In both machines, an electric motor rotates a tool and they are guided by hand. Both can also be operated stationary – the drill with a drill stand, while the router is also available as a router with a table.
A very important feature of the router is the milling basket, which can be lowered in a finely adjusted manner. On it, the router is guided on the workpiece – usually along with a stop. You can find out which other functions and features distinguish the individual devices in this purchase guide. This is how you find out what the best router you should have and be able to do.
Templates for small series
With the help of a copy sleeve, ridgid belt sander you can guide the router along with a template and thus produce the same shape or profile several times identically. Very individual cut-outs are also possible with stencil technology.
What types of routers are there?
Basically, there are only two different types of routers – the stationary and the hand-held:
Milling table: It is a router with a table. The router is mounted from below on a table with recess. The workpiece is moved over the milling head protruding above in order to carry out the milling from below. To adjust the height, the router is moved up or down with a crank. With such a setup, changing the collets to the tool holder is often cumbersome. For this reason, it is best to install devices for milling tables whose collets can be replaced from above.
Hand-held router: In this case, the router is guided on the workpiece with one or two hands. Therefore, a distinction is also made between one-hand and two-hand routers. Larger and often heavier routers (3,000 to 4,000 g) are two-hand routers and small, light (up to 2,000 g) are often one-hand routers. The small routers are used more as edge milling, for profiles and decorations.
