Some users are not interested in technical stuff, so they avoid such tasks. Many people are afraid of doing technical diagnosis on these devices. Canon Printer can be contacted if you are unable or unwilling to help with technical troubleshooting. If you are able to troubleshoot your own Canon printers

Replace Waste Ink-Absorber

In these cases, the replacement of waste ink-absorbers can have a positive effect and help eliminate many errors

You can also find additional information here:

  1. Click on the “Power Button”

Turn off the printer and connect it to the main power supply board. While pressing the Power Button, hold down the Stop/Reset button.

  • Click “Stop/Reset Button”.

After your Canon printer is turned on, press and hold the power button. Then, simultaneously press the “Stop/Reset” button twice.

  • Move into Service Mode

Once you have completed the above steps, your printer will go into Service Mode

  • Click on the “Stop/Reset” Button

When the power light turns red, press the Stop/Reset button twice

The LED light will turn off by pressing the Stop/Reset Button one per second.

Notice: Press the button four times to reset the waste ink counter

Notes on the number of LED reset button pressing functions:

  • Green Power Offer – Zero Time
  • For 1 print the Orange Service pattern
  • 2x Green EEPROM Print
  • 3 times Orange EEPROM reset
  • 4 times Green Waste ink counter reset
  • Your printer should be turned off

Turn it off and then turn it on again. Make sure that the canon mx490 Printer Error Code 5800 is resolved.

Conclusion:

Turn off the printer then back on again. If the problem persists, see the manual”. Here are a few of the most probable reasons which result in ij start cannon printer error 6000 is there are foreign objects such as dust particles, paper pieces, pins, stickers or other objects that block the proper opening of the paper feed tray. Because of the jam, the printer displays the error 6000. Despite having a lot of possible reasons, the most common cause of error 6000 on your printer is paper or foreign objects being stuck in the input tray.

LEAVE A REPLY

Please enter your comment!
Please enter your name here