If you are looking for Hardwood Flooring Services, you’ve come to the right place. Read on for information about installation, refinishing, staining, and protective rugs. You can also get free samples of different types of hardwood flooring and learn about the benefits of each. You’ll be glad you found this resource. If you’re looking for a new floor for your home, contact Hardwood Flooring Services today!
Installation
Before installing hardwood flooring, make sure you have a plan. Not following a plan can lead to problems during installation, and may result in a look you don’t want. When buying hardwood, you’ll notice its unique graining and color variations, so plan ahead before purchasing. To plan your layout, open the box of planks and lay them out in the room. Consider where you want long planks and short ones to be placed.
Before installing hardwood flooring, it is important to check the subfloor for moisture. Concrete slabs that are classified as dry at the beginning of the project may become wet in other seasons. If there are signs of moisture, install 6-mil poly film moisture barriers and use a moisture-controlling adhesive, such as Mapei 985 or 995. Make sure the humidity level in the room is within a reasonable range, such as 35-55%. This humidity level will be maintained for the duration of the flooring installation.
- Refinishing
You can refinish your hardwood floors as often as you’d like. However, you should consider recoating hardwood floors every three to ten years, depending on foot traffic. If your floors have lost their finish due to improper cleaning, refinishing them is a better choice. Refinishing can also change the look of your flooring, but you should consider the benefits of refinishing before making the decision. To make sure your hardwood floors last as long as possible, follow these steps.
Clean the wood floor thoroughly before you start the process. To avoid marring the finish, use a damp rag and mineral spirits to remove dust. Always avoid using oil-based cleaners on hardwood floors as they can affect the final layer’s adhesion. You should also close off the room to be refinished. The following step will give you a great finish for your floors. Just remember, you don’t have to sand the wood floor completely before you begin the process.
Staining
While painting a wall is an easy process, staining a hardwood floor is a complex task. While mistakes in painting are easy to correct, mistakes in staining require you to sand the entire floor and start all over again. Whether you hire a professional to stain your hardwood floor or do it yourself, there are many things to consider before you go ahead with the project. There are a number of factors to consider, including the type of wood you have and how much natural light will be present in your room.
First, you must wait for the stain to dry completely before applying the finish. It can take anywhere from 48 hours to a week, depending on the humidity and temperature. It is also important to wait for the finish coat to dry properly. While staining hardwood floors is a complex process, there are many ways to make the job easier. Here are some tips for staining hardwood floors:
Protective Rugs
The best way to protect your hardwood floors is with a protective rug pad. The right rug pad can prevent damage to your floor by keeping it safe from the backing. Thinner rugs with pad backing are not effective at protecting your hardwood flooring. They may add a non-slip grip to your area rugs. However, you should avoid using these rugs with hardwood floors as they may dull the finish. The best option is to purchase a rug pad designed specifically for your floors.
Wool – a traditional fiber for rugs. Wool is the best fiber for a rug because it can be cleaned easily and can absorb most of the damage done to your floor. Another important consideration when buying a rug is the backing. Latex backing is the worst choice since it traps moisture and gases which can ruin the finish of your hardwood floors. Wool rugs also feature a woven backing, which allows air to circulate and protect your floors. Felt rug pads are another great choice.
Cost
Labor costs for hardwood installation usually range between $3 and $4 per square foot. This will vary depending on the hardwood used, the location, and the subfloor’s condition. The more expensive, exotic hardwoods can cost anywhere from $8 to $15 per square foot. However, this price does not include the cost of materials and supplies, which can add up to quite a bit more. You should factor in the labor cost when estimating the cost of hardwood installation.
Most flooring services charge by the square footage of the area being covered, so the larger the area, the higher the cost. A room’s square footage can be calculated by measuring the width and length of the rooms. If you have several rooms in a house, you may have to measure different sections to determine their square footage. This can add another $100 or more to the overall cost. In addition to the square footage, other factors that can affect the cost of the project include location and building policies.