If you are looking for an easy way to install a vinyl plank floor, try tongue-and-groove or interlocking installation. This method is easier to install than glue-down installation, and is also very durable and easy to clean. Read on to learn more about installing a vinyl plank floor. Here are some tips to get you started:
Interlocking installation is similar to tongue-and-groove installation
In terms of installation, the process is similar to tongue-and-groov installation, except that with interlocking vinyl planks, the tongue engages into the groove of the previous plank. To ensure a tight fit, use a rubber mallet to tap the planks into place. A small gap is okay, but any more can cause problems down the line.
After you have installed your new luxury vinyl plank flooring, you should clean the area with a damp mop. Make sure to clean any spills immediately after they occur. The tongue-and-groove installation technique snaps the planks into place, whereas the peel-and-stick method requires removing the cover paper to expose the adhesive. Fortunately, this method saves you money and allows you to install your vinyl plank flooring yourself.
In both cases, you should cut the ends of the planks according to the width of the room. To determine how many planks you will need to install, divide the width of the room by the width of the planks. Then, measure out the space in between the rows and make sure that they are at least six inches apart. If the width of the last row is larger than the rest of the planks, cut them a little smaller so that they fit snugly.
It is easier to install than glue-down installation
If you’re considering installing a vinyl plank floor in your home, you may want to know that it is much easier to do than glue-down installation. While gluing down your planks is much easier than floating, the process may not be appropriate for the do-it-yourselfer. Glue down floors require a lot of patience and a steady hand. Glue-down floors can be tricky to install, so a professional is usually needed.
Floating vinyl plank is more stable than glue-down options. Compared to glue-down flooring, floating plank flooring can be lifted up without damaging the subfloor. If you’re planning on installing a vinyl plank floor in a wet area, you might want to consider gluing-down installation, but if you’re working with a tight budget, floating may be better for you.
It is durable
If you’ve been thinking about installing a vinyl plank floor in your home, here are a few tips to ensure a successful install. To ensure durability, plank flooring should be installed end to end, with at least a 1/4-inch expansion space between adjacent pieces. If you’re installing the flooring in an existing room, you should also leave enough space for future expansion. To make vinyl plank floor installation easy and efficient, you can rent tools from a professional flooring company. These companies also offer flooring installation services.
The first thing to remember about vinyl plank floor installation is that it is not easy to remove. This is true of both glue-down and snap-together installations. If you happen to break a plank or have any other issue with the vinyl plank floor, it is almost impossible to replace it. It’s also nearly impossible to replace a single piece, and in most cases, you’ll have to replace the entire floor.
It is easy to clean
Because vinyl is soft, it’s easy to scuff and scratch. A baking soda and water paste can get rid of dried-on food, and you can wipe up discolored foods with a microfiber cloth. If you do find a stain, you can use rubbing alcohol to clean it off or use a hair shampoo. To prevent further damage, always dry the floor completely after cleaning.
Cleaning a vinyl plank floor installation requires regular sweeping and dusting. Regular sweeping prevents buildup of dirt and dust, and prevents stains and mildew from ruining the floor. If you have children or pets, brooming your floors at least twice a day is ideal. A robot vacuum is also great for dusting, as it can automatically clean your floor two times a day.
