So, there are many common reasons why it is not working. In this article, we’ll go over the common causes and troubleshooting tips for a faulty water dispenser. We’ll also cover how to clean the water line inside the fridge, which can be a common source of refrigerator water dispenser problems.
Problems with a refrigerator’s water dispenser
If your water dispenser is not working, you may need to replace a few parts. First, check the water dispenser actuator. This plastic bit pushes the micro switch to activate the water dispenser. The actuator will make a clicking sound when you push it. Next, check the switch mounting bracket and the pivot. If the actuator is faulty, you may need to replace the switch or the control board. If you’re not sure which part to replace, you can also try replacing the water dispenser control board.
If the problem persists, try disassembling the water dispenser and unplugging the refrigerator to isolate the problem. If the water dispenser is spraying or is blocked, the main cause could be the water inlet valve. You can trace the water line to determine if the solenoid control valve is to blame. You can also test the solenoid terminals by using a multimeter to check for continuity. If you find debris in the water tube, replace it immediately.
Common causes of a faulty dispenser
There are several common causes of a faulty refrigerator dispenser, which you can troubleshoot by yourself. These include a kinked water line that prevents water from flowing through the dispenser. Another common cause is a frozen water line that requires defrosting with a hairdryer. If the water line is not frozen, you should check the inlet valve to adjust the water pressure. If the water pressure is low, it could be a control board problem. If it is, you should call a professional technician to come and fix it.
The water dispenser is probably the easiest part of a refrigerator to use. However, it can also fail to function for a variety of reasons. For example, a broken water inlet valve may not allow water to flow through the dispenser. The pressure switch can be replaced with a simple mechanical repair, and it’s typically an easy job to perform. However, if you are unsure of how to repair a broken dispenser, you should contact a professional technician.
Troubleshooting steps for a faulty dispenser
If you have a faulty refrigerator dispenser, you may want to start by identifying what is wrong with it. You can determine which component is malfunctioning by looking for the following signs: the water inlet valve is frozen or kinked. The water valve needs a minimum of 20 psi to operate properly. Another problem could be the low water pressure in the dispenser’s water supply line. If you find these symptoms, contact a technician who can troubleshoot your dispenser.
First, check the refrigerator’s main control board. The main board controls the entire fridge. If this board is faulty, you may need to replace it. In some cases, you can also perform tests by using a multimeter to determine if the switch is to blame. Otherwise, you may need to take the refrigerator to a repairman to determine the exact problem. If you are unsure about the fault, watch the troubleshooting videos to see which parts you can replace.
Cleaning the water line inside the fridge
Taking a step back and looking at the water line inside your refrigerator dispenser is a good idea before starting the cleanup. Although this area is usually overlooked during routine kitchen cleaning, it is vital for clean, bacteria-free water to be served to your family. First, turn off the water valve located behind the refrigerator. Then, remove the water line feeding the ice maker and free the dispenser line. Once you’ve freed up the line, remove the ice bin and make sure it’s fully thawed.
A dirty water line can result in an unpleasant taste, a foul odor, build-ups, or even a blockage preventing the refrigerator from functioning properly. You can easily clean the water line inside the refrigerator using rubbing alcohol and cotton swabs. To get rid of bacteria, repeat this process for about five minutes. This process should produce ten to fifteen glasses of fresh water. Performing this simple yet effective task will not only improve the taste of your water but will also prevent unpleasant smells from affecting your food.
Troubleshooting a kinked or frozen water line
A kinked or frozen water line in ice-making or refrigerator dispenser units can affect the functioning of the fridge. To fix the problem, you need to check the water line for damage and kinks. If you find frozen water, thaw it by using a hair dryer. Damaged water lines can require a service technician’s help.
The water supply valve is usually located on the back of the refrigerator and should be accessible. If the valve isn’t accessible, use a socket or nut driver to access it. Check the voltmeter to see whether the water line is kinked or frozen. If the voltmeter still shows 120 volts, check the water line. If it’s still frozen, try pressing the water dispenser paddle to see if the water flows normally.
Repairing a frozen water line in the fridge
If you’ve found a puddle under your refrigerator, don’t panic. It might be stray splashes from the water dispenser or a dropped ice cube. But if it’s a pond, it could be a frozen water line in the refrigerator’s icemaker. If you’re not a handy guy, here are a few tips to get you started.
First, try to raise the thermostat. Sometimes, the water line freezes due to excessive moisture or cold. If you are not sure of the exact temperature, try placing a thermometer between the packages in the refrigerator. If it doesn’t feel cold, it might be an insulation problem. You can also try closing the door to prevent moisture from getting in. And if the problem persists, you can try replacing the water valve or installing a new water filter.